fbpx

Sliding kart

What can I work on to be faster in a kart?

What can I work on to be faster in a kart?

Drunk Vs Sober

Over the years I have considered at depth, what makes the difference between the fastest kart racers and the rest of the drivers? One afternoon a thought came to mind…

Here’s a question for you.. “What is the difference between a drunk driver and a sober driver?”

How about …

  1. Balance
  2. Timing
  3. Reflexes
  4. Judgement
Why are drunk drivers less capable?

These give us 4 strategic dimensions to work on your kart racing.

  1. Improve Stability and Balance through posture and mechanics.
  2. Improve Timing, through track awareness and timing techniques
  3. Improve effect of bad reflexes through track awareness, timing and racing lines.
  4. Develop race craft through tricks and techniques to passing. (better judgement)

Now that we have some targets we can think about exercises that we can develop to work on each area. Note that not every dimension requires us to be on the track. We could work on timing and balance in a numerous ways. If you get creative you can really open your possibilities.

Accumulation theory

There are many subtle little tricks we can learn to develop small advantages within each strategic dimension, these little advantages accumulate to become an overwhelming edge that bring consistent speed and position in race situations.

I wont go into detail on each dimension but if you are looking for areas that you can develop to improve your ability then these are 4 areas to begin.

I will say, how you sit, how you turn, how you use the steering and brakes. How you try to use timing instead of reflexes, how you use your eyes and how much you try to prepare in advance and pre-empt the track ahead. All of these things accumulate into an accumulation of advantage.

This makes the difference between driving something like a drunk driver vs driving like a well balanced driver who knows in advance what is coming.

See you on the track.

How to avoid the mistake of sliding in a Go Kart

How to Avoid the Mistake of Sliding in a Go Kart

Fixing up Sliding & Drifting

Sliding: It looks cool, feels fast, but the truth is, it is slower than molasses and is a sure fire sign of an inexperienced racer.

Fix the slide, and it’s the surest way to beat all your buddies, qualify for advanced status, and challenge the veterans for fast lap honors.

Added Bonus! This applies to real cars as well.

Why is slding slow?

Indoor karting is all about managing a very small amount of energy, because you have very little horsepower in your engine you can only build your energy up slowly. Once you have momentum you have to bring that energy into a turn, carry it through the turn as you rotate the kart and then make use of whatever you have left on the exit of the turn. Every little bit makes a difference because if you can save energy in a turn then you need less energy to get back up to top speed.

Sliding throws your energy and momentum away in the turn.

After a slide, on the exit of the turn, you have to kind of start all over again building up your momentum energy.

If you slide, fast drivers will just drive around you like you are parked still, and in many cases a slider WILL be parked still.

There are 3 types of slide.
1. The Entry slide
2. The Middle slide
3. The Exit slide.

Just about all drivers are guilty of losing speed at some time to these three types of slide, even the pros. But here’s what you need to know to fix them.

By Entry, Middle and Exit, we are talking about corner phases.

In the image above we are approaching from the left and exiting on the right. 

It is important to start thinking about how each phase also has an optimal assigned purpose, and although they seem obvious they have profound consequences on your ability to be fast.

Goals for the Entry.

Our assigned purpose is to SLOW DOWN! We do NOT want to also be doing anything in the middle and exit that causes us to slow down, we want ALL decreases in speed adjustment to happen in the entry phase.


Goals for the Middle turn.

 Our purpose is to Balance, or to get control of the kart and spread the forces evenly between the front and rear tires. This will let us maximize the momentum and lock the kart to the ground without sliding. This sets us up for the next phase. It is not so much about acceleration here, as it is about balance, many pros only coast through this phase and wait wait wait for balance before trying to accelerate out. Remember if you are doing it right, you are already at the limit of traction here. 

Goals for the Exit.

We want to be doing things to Accelerate us. As a base line, until you get the hang of it, you should wait until you have passed the very middle “apex” of the turn, which is about when you pass the middle of the inside bumper, before you start to apply the gas. Do this and you will always be balanced before you accelerate. And Don’t rush it! Squeeze on easy and steady.

Fixing The Entry Slide. This is a slide that begins on the entry, it might carry on through the middle and into the exit, but it begins on entry.

On Entry we need to SLOW DOWN. Seems obvious right? But it is NOT just braking, there are actually several things things you can do to slow down, whether you know it or not, many drivers ALSO do these slow down things in the other phases of the turn, and this is where the mistakes begin that lose you speed.  These are ALL the slowing actions…

  1. Braking 
  2. Letting off on the gas 
  3. Turning the wheel MORE into the turn, (includes wiggling your hands when IN the turn)
  4. Sliding the rear

Note that each idea has different degrees of slowing potential, so the transition times can be gentle or violent. And in general we want our transitions to be precise, but smooth and gradual, and where possible as gentle as handling a vial of anthrax.

So in an ideal situation, ALL your slowing actions happen in the ENTRY phase of the turn.

For example “Turning the wheel MORE into the turn”, you only want to be adding steering when you are in the entry phase, if you are adding more steering in the middle and exit phase then you are making a mistake that is slowing these phases. If you think carefully about what you are doing in turn where you seem to be slow, you can find these mistakes on your own.

The second goal of the entry is to get your kart SET for the turn, in an optimal way. In almost every situation, with very very rare exceptions (which won’t matter until you are seasoned pro), you should be LEANING OUT OF A TURN – NOT INTO A TURN! And you do this on the straight before the entry – NEVER after you have turned the wheel in, always before. Take my word for it, it’s critical to speed in an indoor kart. There are very real reasons for this that any pro can explain to you.

If you slide beginning on entry, it almost always just means you are coming in too hot, or braking too late. Generally here we mean your rear wheels are sliding. It is possible that your front wheels are sliding too, but generally this does not happen until mid turn.  It’s the same cause though, coming in too hot. So start slowing down earlier!

The fastest deceleration will happen in straight lines, so in general if you want to brake late and more effectively, you should look for ways to brake in straight lines BEFORE you turn the wheel. You have rear brakes so lean backwards when you brake to put your weight on the rear – YES it makes a difference – the easy way is to lift and keep your head up high when you apply the brakes.

Fixing The Exit Slide. This is a rear slide that begins on the exit, after a stable entry and a stable mid turn entry.

Before we discuss the middle slide, we will look at the most common error, the exit slide.


Exit slide almost always means you are getting on the gas too early, but it can also mean you are offline and turning in too early. In general though, with even a little practice we can make any line stable with the right foot and hand work, so the exit slide can be a little deceiving when you are chasing the last .100 seconds. Even being slightly off line you can still qualify if you fix this one, you just won’t beat the fast guys until you fix the line.

So if sliding on exit, the first thing to try is to just get on the gas later. And the next thing to ask is, “Should I turn in later?”. You will know if you need a later turn in, because the other drivers will seem slow on the entry but pull away from you on the exit while you are still stuck trying to turn.

If you find you can not get full throttle until you are way past the middle of the turn, then you DEFINITELY have a bad line. You need to turn into the turn later, so delay your entry a bit and wait a bit more before you turn in. Start by deciding EXACTLY where you will turn in, and make sure you can hit that spot consistently. Then make adjustments, if you think you need to get on the gas earlier, move your turn in point forward by about 3 inches at a time, until it feels right.

Remember now you might need to slow down on the entry a little bit more to make it work. Don’t let that bother you, as any pro will tell you, the secret trick is to be SLOW IN and FAST OUT. As you will soon learn, fast in and fast out, generally doesn’t work, because it places you too close to the limits and messes up the balance and transition phases. Fast in-fast out strategies are very inconsistent and unstable, and the regular mistakes result in catastrophic loss of speed. Also the only way to make fast in fast out work, is to drive a big wide sweeping line, which makes the track so much longer, that you never make up for the time lost. That’s when you experience the feel of drivers pulling away from you in turns while you are still stuck rotating in the turn.

Fixing the Middle Phase Slide. This is a slide that begins after you have slowed, are approaching the apex and getting ready for the exit.

Take note of the shape of the driving line in our diagram, note that it arcs more in the Entry, then it opens out in the Exit phase and is almost straight in the exit. This is the classic slow in fast out line, with a slightly late apex.

Remember TURNING INTO a turn slows you down a little, so TURNING OUT should speed you up a little. Note the shape of the arc through the middle, it almost holds steady through the middle, without increasing, while it starts to open at the apex.

If your entry was stable and you start to slide in the middle, it could be several reasons, but generally it means you did not get set up for the turn early enough, and you are still trying to make radical inputs. 

In general you should be all set by the middle, and not need to be slowing down or speeding up, or changing lines. You should be holding steady and either coasting or making very very very subtle movements to maintain control and balance.

The reason coasting the middle works so well, is that during your entry phase a lot of the weight is thrown to the front of the kart, which makes the rear of the kart light. You have almost no traction at all in the rear, if you are doing things right. By coasting, the weight gently returns to the rear wheels and evenly distributes between front and rear wheels, giving you maximum rubber to carry the turn. As you begin to release the steering input more weight shifts to the rear and front pressure drops and the rear tires are given downforce to accelerate you out.

Hit the gas too early, before that weight has balanced, and you lose the back end (slide). OR another type of problem can happen, called the push, because the back plants and the front gets TOO light, you lose front steering. OR another problem called the BIND, where the back wheels plant – the weight shifts rearward and all four wheels fight causing a braking effect as you try to accelerate out. SOLUTION: Be patient – wait for the balance.

As you become a pro, you will learn to develop ‘the feel’ to be able to push the limits, and there definitely *tricks* that can be taught to cheat the balance, but it all begins with mastering the balance in the middle through coasting first.

Review of kart sliding problems and solutions

1. ENTRY SLIDE   – COMING IN TOO HOT  – SLOW DOWN MORE!!
                              – BRAKING TOO LATE    – SLOW DOWN EARLIER

2. MIDDLE SLIDE – OFF BALANCE – COAST MORE
                            – ADJUST YOUR SPEED EARLIER**

3. EXIT SLIDE – GETTING ON THE GAS TOO EARLY  – PATIENCE
                        – OFFLINE – APEX LATER

Remember the purpose of each phase
Entry = slow down
Middle = Balance
Exit = GO GO GO

Advanced TIP: Middle slide often happens because we are able to get into a corner with stability, but then in the middle suddenly realize we need to make an adjustment. Already being at the limit, even with a slight throttle blip or fractional twitch of our steering, we lose traction slightly.  If you find consistent mid turn instability, begin by asking yourself what the adjustment is that is causing it, and then resolve to do that adjustment earlier, even if you don’t think you need it yet. You almost always find after this modification to your line that you get more acceleration through a turn. This will really help you in a sweeper turn.

If you find Indoor Karting fun, and want to learn from the best drivers, come and jump into the racing leagues, they’re open to all skill levels and you are guaranteed to get faster.